: On your case cables, the positive wire is usually colored (red, green, or blue), while the negative wire is typically black or white. You can also look for a small triangle (▲)
The IPISB-VR Rev 1.01 is a robust OEM board, but its front panel header requires a non-standard wiring approach. Successful integration requires ignoring the generic "ATX Pinout" charts and treating the connector as a proprietary interface, specifically noting the adjacent Power Switch pins and the specific LED polarity. If connecting to a standard case, it is often easier to cut the individual 2-pin headers off the new case's wires and insert them into the Acer block one by one, rather than trying to force the entire block onto the pins incorrectly. acer ipisb-vr rev 1.01 front panel
| Pin # | Signal Name | Function | Wire Color (Typical) | | :--- | :--- | :--- | :--- | | | PLED+ | Power LED Positive | Green or White | | Row 1, Pin 2 | PLED- | Power LED Negative | White or Black | | Row 1, Pin 3 | PWR_SW | Power Switch (Positive) | Orange or Blue | | Row 1, Pin 4 | PWR_SW | Power Switch (Negative/Ground) | White or Black | | Row 1, Pin 5 | RESET | Reset Switch | Red or Blue | | Row 2, Pin 1 | HDD+ | HDD LED Positive | Red or White | | Row 2, Pin 2 | HDD- | HDD LED Negative | White or Black | | Row 2, Pin 3 | GND | Ground for Reset Switch | N/A | | Row 2, Pin 4 | GND | Ground for Power Switch | N/A | | Pin 5 (Row 2) | (Missing) | Key (No pin) | N/A | | Pin 6 (Row 2) | +5V_DUAL | 5V Standby (Not typically used for front panel) | N/A | : On your case cables, the positive wire
If you try to connect a standard ATX case with individual 2-pin connectors, you’ll need: If connecting to a standard case, it is
The number one complaint about the is: “I connected everything, but the PC won’t turn on.”