Slide the red safety lock to the side and press the button simultaneously. Indicator Lights Power: Unit is plugged in. Heating: Water is currently being heated. Cooling: Water is currently being chilled. Empty Bottle: Flashes when the water level is low. Cleaning and Maintenance
: Activate the red switch at the back. It takes approximately 15–20 minutes for water to heat up. viva water dispenser manual 8liech-sc-ssd
Here are the technical specifications of the Viva water dispenser 8Liech-Sc-SSD: Slide the red safety lock to the side
Once upon a time, in a home that valued hydration and convenience, there stood a Viva (Whirlpool) Self-Cleaning Water Dispenser, Model 8LIECH-SC-SSD Cooling: Water is currently being chilled
: If the unit was not transported upright, let it sit for at least four hours before plugging it in to avoid damaging the compressor.
| Model | 8LIECH-SC-SSD | |-------|----------------| | Voltage | 110–120V / 220–240V (check local rating) | | Frequency | 50/60 Hz | | Heating power | 500 W | | Cooling power | 85 W | | Hot tank capacity | 1.0 L | | Cold tank capacity | 1.5 L | | Bottle type | 3 or 5 gallon bottom-load |