Use the modern from eGPU.io forums. It’s free, open source, and works on Windows 10/11 for M.2/Thunderbolt eGPUs.

You will need to set your laptop to boot into the utility before Windows.

: Downloads advertised as "free patched" versions are unofficial and often distributed through third-party sites or forums. These versions lack developer support, may be outdated, or could contain malware. Because the software operates at a low level (pre-boot), using an unverified "patched" version carries a high risk of bricking your OS installation or causing system instability.

Building a DIY eGPU can turn an aging Toshiba or ThinkPad into a capable gaming machine, often jumping from 5 FPS to 60 FPS in modern benchmarks. However, it requires patience and a bit of technical troubleshooting. If you are struggling with a laptop that won't "see" your card, this software is often the missing piece of the puzzle. DIY eGPU Setup 1.35 (was Setup 1.x) by nando4 | eGPU.io