M2120 Resetter — Epson

Connect your M2120 via USB and turn it on. In the adjustment program, select “Epson M2120” from the model list. Click “Select” – the program should detect your printer.

This only resets the chip on the box, not the printer’s internal counter. For the M2120, you typically need both a hardware reset for the box and a software reset for the printer’s memory. Therefore, the software method is more thorough. Epson M2120 Resetter

Epson printers like the M2120 use internal counters to estimate the amount of waste ink collected in the maintenance pads. When this counter reaches a specific threshold, the printer triggers a or "E-11 ink pad needs service" error. Connect your M2120 via USB and turn it on

When you print or perform head cleanings, excess ink is collected in internal waste pads. Once the printer's firmware estimates these pads are full (often indicated by flashing red lights or the ), it will lock itself to prevent ink overflow. The resetter performs the following: This only resets the chip on the box,

Before proceeding, make sure you have the following:

, typically referred to as the or WIC (Waste Ink Counter) Reset Utility , is a software tool designed to resolve the "Service Required" error that occurs when the printer's internal waste ink pad counter reaches its limit. Primary Functions of the Resetter

: Reads the current status of the waste ink counter, ink levels, and generates diagnostic reports.