: Plug the field wiring back into the new module. It is compatible with 12 VDC power, cabinet tamper, and AC power fail inputs from legacy power boards. Network Setup : Connect via the onboard 10/100 MB Ethernet port. Initial Configuration & IP Setup To access the web configuration page for initial setup: Default IP Address 192.168.0.251 Computer Configuration : Set your laptop to a static IP in the same range (e.g., 192.168.0.250 ), avoiding DIP Switch Settings Switch 1 OFF, 2 ON, 3 OFF, 4 OFF for initial web configuration access. To use default credentials (Username: , Password: DIP Switch 1 ON