Disclaimer: Gilbarco Veeder-Root is a registered trademark. This article is for informational purposes. Always consult with a certified fuel systems integrator and adhere to local electrical codes (NEC Article 514) before modifying dispenser wiring.
For third-party integration, you generally need a converter to bridge the dispenser's current loop with the controller's serial (RS-232/USB) or TCP/IP interface. Disclaimer: Gilbarco Veeder-Root is a registered trademark
Third-party controllers must match these specific serial settings to establish a handshake with Gilbarco dispensers: 4-20mA Comunications - All About Circuits Forum For third-party integration, you generally need a converter
The system follows a strict architecture where the master (the controller) initiates all communication. Data Format : 8 Data bits, Even Parity, and 1 Stop bit
: Used by Highline-2, Euroline, Euro Dimension, Doms DP-9000, and Australian models. Data Format : 8 Data bits, Even Parity, and 1 Stop bit. Physical Layer
) to bridge to RS-232, RS-485, or USB for third-party controllers. Error Checking