Selmarturbo4batterychargerinstructions -

Remove the clamps (Black first, then Red) to minimize the risk of sparks near explosive battery gases. Key Features and Safety Ammeter Display

The Selmar Turbo 4 typically features an ammeter. When you first start, the needle will move to a higher amp reading (near 4 amps). As the battery charges, the needle will slowly drop toward zero. selmarturbo4batterychargerinstructions

The Selmar Turbo 4 is a robust, 12V 4A manual battery charger designed for efficient charging of lead-acid automotive and leisure batteries. As a manual charger, it requires active monitoring to prevent overcharging, as it does not automatically shut off when the battery reaches full capacity. Voltage: 12V DC. Charge Rate: 4 Amps RMS (approx. 2.7A - 2.8A DC). Remove the clamps (Black first, then Red) to

Connect the clip to the positive terminal and the Black (-) clip to the negative terminal. Charging : Plug the charger into a fused AC mains socket. As the battery charges, the needle will slowly