Note: The Power Switch and Reset Switch pins are non-polarized (orientation does not matter). The LEDs (Power and HDD) are polarized; if the LED does not light up, reverse the connector.
| Jumper Setting | Mode | Function | | :--- | :--- | :--- | | | Normal | Default setting. BIOS executes standard boot process. | | Pins 2-3 | Configure | Used for recovery or resetting passwords. BIOS setup displays maintenance menu. | | Open (No Jumper) | Recovery | Used to recover the BIOS from a diskette or USB key. | Intel Desktop Board E210 882 Manual
Memory Slots: Support for DDR2 or DDR3 SDRAM (check your specific revision for voltage requirements). Note: The Power Switch and Reset Switch pins
Post a high-resolution photo of your board to: Intel Desktop Board E210 882 Manual