Ivoclar Programat P90 Manual (2026)

Before operating the furnace, familiarize yourself with the following parts:

| User Error | Manual’s Explicit Solution | | :--- | :--- | | Using a metal spatula to clean the muffle | “Use only the supplied ceramic cleaning brush or plastic tool.” | | Pressing without a vacuum (selecting wrong program) | “Always confirm program type (P/F/G/C) before pressing START.” | | Overloading the press piston | “Maximum press force is 600 N. Do not exceed the ingot size recommended for the restoration.” | | Turning off the furnace immediately after a press | “Allow the furnace to run the automatic cooling cycle before powering off, to prevent thermal gradient damage to the heating elements.” | Ivoclar Programat P90 Manual

The back of the Programat P90 manual is usually reserved for the . Here are the most common ones: Before operating the furnace, familiarize yourself with the

: Users describe it as a "reliable and robust" machine that integrates well with Ivoclar Vivadent ceramic materials. Operational Summary (Manual Highlights) : The furnace includes a manual calibration mode

The Ivoclar Programat P90 manual is far more than an accessory. It is a comprehensive technical training course, a safety codex, a diagnostic encyclopedia, and a maintenance logbook all in one. Skilled technicians do not see reading the manual as a beginner’s chore; they return to it to check vacuum decay rates, confirm bushing lubrication intervals, or interpret a rare error code.

: The furnace includes a manual calibration mode (often requiring a Silver Test kit) to ensure that the actual temperature inside the muffle matches the digital readout.